The main bearings are all ball bearings.
This action speeds up or slows down the first-speed gear to match the speed of fundamentos de la fe cristiana pdf the output shaft.
Align the countershaft gear bore and thrust washers with march from the nutcracker suite piano the bore in the case.
Align the gear bore and thrust washers with the case bores and install the reverse idler shaft.Remove the alignment tool.6-38 group 6-manual shift transmissions.Ford motor company 4 speed transmissions: borg-warnears, parts List 39 Cast iron, side loaded jad file to jar file converter case with 9-bolt side cover.Install a detent plug and spring in the detent bore.Install the first-and second speed synchronizer onto the front of the output shaft (Fig.Mazda Meries Trucks Parts List 64 Aluminum, top loaded case with integral bell housing.Also, because of the angle of the gear teeth, more teeth are in engagement at any one time.Adjust the shift linkage as detailed in Section.6-32 group 6-manual shift transmissions 2 IN-CAR adjustments AND repairs, fIG.Press the input shaft gear out of the bearing as shown in Fig.Remove the dummy shaft, two bearing retainer washers and the 44 roller bearings from the reverse idler gear.Coat the cover attaching screws with sealer and install and tighten them to specifications.Place the three inserts into place on the hub.NEW process Trucks Parts List 83 Cast iron, top loaded case with a rectangular top cover and tower shifter.
If necessary, lower the engine enough to obtain clearance for transmission removal.