Contact Premium Support, this product has been discontinued.
This tutorial will walk you every step of the way through flashing your Linksys WRT54G (version 8) router to use the DD-WRT firmware.
Note: Please verify the hardware version of your device for the firmware version.After the 2 minutes is up, if you notice a dialog asking you to reboot the router, do so by unplugging the power cord and plugging it back in again.Click to enlarge The file will be transferred and automatically installed.When editing settings on the Administration page for the first time (after flash or hard reset make sure that you change the interface language dropdown to Simplified Chinese, then back to English.Click to enlarge, make sure that n is listed on the Management Mode Firmware Upgrade page, and click the Apply button.Hit the enter key.Putty Setup in Windows XP windows 7 64 bit beta iso After installing putty, run it Serial line The COM winamp media player 5.63 port your using for serial (ie.Once configured set your computer back to autoIP and autoDNS.(or to whatever subnet the router is on) Disable all firewalls and security.Mac.6.8 in Chrome, Firefox, Safari.Enter your new user name and/or password to continue.Set your computer to a static.Use a pencil or ball-point pen to push and hold the Reset button its a bit recessed and very difficult to push and hold with your finger or fingernail.Set your computer to a static IP address of Subnet mask to Plug a lan cable from your computer to a LAN port on the router.Browse to the n you downloaded, and hit upgrade.If the router doesnt reply dark souls 2 save editor ps3 you probably havent set your network settings correctly (step #3 above).Power: 12, vDC, 1, a Connector type: barrel, cPU1: Broadcom, bCM4705L ( 300 MHz fLA1: 8 MiB 8,388,608 B 65,536 Kib 8,192 KiB 64 Mib.00781 GiB samsung.Type, date, no Downloads Available.To do so, enter the appropriate command for your Operating System: Windows : (note: Vista users will need to install tftp first ) enter tftp -i put n from the Command Prompt.
Do a hard reset on the router (hold the reset button for 30 seconds, OR from the GUI, do a reset to factory defaults.