However, installing a dish antenna yourself is not difficult.
Prior to moving on words of wisdom book with the installation process, you have to purchase a satellite TV kit.Move dish back and forth very slowly until you get the highest reading on the Quality bar.When you see the word Store at the bottom of that box press OK button.75cm Andrew Channel Master Type 750 Antenna 30" 75cm Rec only 169.00 Type 750Rec only Data Sheet 30" 75cm Rec only 269.00 Type 755RX Rec/Transmit Data Sheet 84cm Andrew Channel Master Type 10500 Antenna 234.99 84cm Elliptical Receive Only Data Sheet 264.99 84cm Elliptical Rx/Tx Data.Geosat pro 1000ci - Glorystar 2 lnbf sytem.Press *right arrow to select.69.99 49.99 Add: Displaying 1 to 26 (of 26 products).Press VOL up button (the button that points to the right) to installation screen with "Antenna Setup" highlighted.Manual azimuth, elevation, polarization.18" Inch Dish.99 w/ lnbf Description: 18" Dish With Dual lnbf standard mounting pole included gray powder finish.If signals with different polarization are sent over the cable at the same time, they would interfere with each other.Generally this dish is considered a legacy dish.6 Lock the antenna azimuth adjustment on the mount once the signal level is maximized.Move dish back and forth very slowly until you get the highest reading on the yellow Quality bar.These dishes are required to receive the new mpeg-4 local and national HD programming.1/2" Precision Machined F-Connector Threads. .Press Menu button Press VOL up button (the button that points to the right) three times to utility menu Press the Channel up button (the button that points to the up) to highlight factory default Press OK button to display ARE YOU sure TO load.DirecTV system - only the slightly larger oval or rectangular antenna dishes will able to pick up all DirecTV standard and HD programming.
On the left side of the screen you will see a signal quality strength indication bar.
The next step is to plug your receiver into a household outlet; turn your television set on and make any necessary adjustments to the satellite system settings.