I have sleepers 100x200mm and want to cut trenches/rebates into them the longer way.
New 1400 Watt motor for powerful cutting in all materials (1400 Watt Low Voltage version UK Only).
Home, power Tools, saws, miter Saws, all Miter Saws Categories.
Dust bag, material Clamp, specifications, power Input 1675 Watts, power Output 960 Watt.Brian replied on orry, mine does not have a date code either Martyn asked on what is the difference between the DWS774-LX and the DWS773-GB.Overview, the classic saw design improved and updated for the modern user.Back 250 mm Slide Compound Mitre Saw with XPS.The manual shows on page 4 that it should be on top of av vcs 3.0 crack full the tool and somewhere else in the manual it says that it is printed on the housing.Cutting materials other than wood I'm just wondering what other materials this might be?(5 crown Stops (for DW703, DW706, DW708, DW712, DW715, DW716, DW717, DW718, DWS780.Integrated positive mitre stops at 15,.5, 30, 45, quick release mitre mechanism up.Bad Points Could use a depth stop like on other DeWalt models Confirmed purchase: Published on: 8 out of 10 Wayne Warrington Good Points Light gives perfect cutting line Bad Points Arm very tight to move hope it will get better in time Confirmed purchase.DWS774, the classic saw design improved and updated for the modern user.I consider buying a newer only because some features like override quickswitch which I'm missing on mine.I tried to take a photo but it did not show up Adam asked on i, Can this saw cut 16 gauge steel?People I work with are mainly makita fans and try to make me to buy a makita ls216L which is same size.Any thoughts or bad experiences?The pics seems to indicate it would be a bit more "compact" when locked down at 45 degrees compared to when in use?Linear horizontal rails utilise bronze guides to provide maximum precision when cutting materials up to 320 mm wide.The following are trademarks for one or more dewalt power tools, accessories, anchors and concrete adhesives: The yellow and black color scheme; the "D"-shaped air intake grill; the array of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps.It is advertised to cut Base Board (Skirting Board) up to 171mm vertically but once the mitre is turned beyond a straight cut it is impossible to make the cut because the lower guard fouls upon the workpiece Lower guard jamming on workpiece Confirmed purchase.Outstanding dust control and deflection away from cutting area.
Murray replied on Just checked.
Thanks Seamus replied on It does to bevel cuts adjustable from 0-45 degrees but there is no trench cutting depth stop on this model.