By default, it should.
This will tell you the IP address of your DIR-615 router.
Give the router an additional 30 seconds to cycle through the reset procedure and power back.On the product label).Also, like the login credentials, you're able to change the default IP address to something else.Other details and downloads, like FAQs and videos, for this router can be found on the D-Link DIR-615 Support page on D-Link's website.Page 3 of the manual below for a picture of this part of the router).Now that you have access again, be sure to change the router's password to something you can remember as well as reconfigure any other settings that were lost, like the wireless network password, ssid, etc.See How To Find the Default book of legends walkthrough Gateway IP Address if you need help doing that.Fortunately, you can reset your DIR-615 router if you can no longer get.Enter the router password.Note: This information is valid for both hardware versions of the D-Link DIR-605L router!Reset button for 30 seconds.Wait another 30 seconds for the router to finish starting.Next Steps If the DIR-615 Default Password Doesn't Work.D-Link DIR-605L Wireless Router.Enter the OpenDNS addresses in Primary DNS Server and Secondary DNS Server fields.Find your way to the far right side of the back of the router, next to the right antenna, to locate the recessed Reset button (if you can't find it, see.Submit a request, return to top, related articles.Now that the D-Link router has been reset, all the custom options you configured in the router, like the wireless password, etc., have been lost and will need to be reconfigured.If you have another device in your network that has regular internet access, go to it and check its default gateway IP address.Here's how to do that: Turn the DIR-605L around so you have full access to the back of the router.The D-Link DIR-605L does have a default username of admin, however, so be sure to include that when signing.
After clicking the Save Settings button, we highly suggest that you flush your DNS resolver cache and web browser caches to ensure that your new DNS configuration settings take immediate effect.
Important: Having two different hardware versions means you must be certain to download the right firmware too since both versions use different firmware.